Open Feedback Window Twitter

LPS170 Series WebSheet

| Print

Product Summary

The LPS170 AC-DC power supply series provides from 2.5 to 54 volts of low output ripple, tightly regulated, DC power. Measuring only 1.5 inches tall, the LPS170s are ideal for 1U (1.75-inch) rack installations and other low-profile applications such as telecommunications, networking hubs and routers, test and measurement equipment, single-board computers and gigabit Ethernet devices.

Resources & Downloads

  • Total Max Power: 175 W
  • Total Max Current: 22 A
  • Input Voltage: 85 V to 264 V
  • Output Voltage: 2.5 V to 54 V
  • Outputs: Single
  • Size (L x W x H): 4.250" x 8.500" x 1.500"
  • Warranty: 2 years
  • Operating Temperature: 0°C to +70°C

Electrical Specifications

Input

  • Inrush current: 38 A max, cold start @ 25°C
  • Frequency: 47 - 63 Hz
  • Efficiency: 75% typical at full load
  • Input range: 85 - 264 VAC, 120 - 300 VDC
  • EMI filter: Meets FCC Class B conducted CISPR 22 Class B
  • Power factor: 0.99 typical
  • Safety ground leakage current: 1.0 mA @ 50/60 Hz, 264 VAC input

Output

  • Hold-up time: 20 ms @175 W load at nominal line
  • Adjustment range: 2:1 wide ratio minimum
  • Maximum power: 110 W convection, 75 W w/cover, 175 W w/ 30 CFM
  • Overvoltage protection: 10% to 40% above nominal output
  • Overload protection: Short circuit protection on all outputs.
  • Standby output: 5 V @ 2 A regulated ± 5%
  • Aux output: 12 V @ 1 A -5 %, +10%

Logic Control

  • Remote sense: Compensates for 0.5 V lead drop min. Will operate
  • DC Ok: TTL logic signal goes high after main output is in
  • Power failure: TTL logic signal goes high 100 - 500 msec after V1
  • Remote inhibit: Requires contact closure to inhibit outputs
  • Built-in EMI filter
  • 5 V standby output
  • DC power good
  • Optional cover (-C suffix)
  • Thermal overload protection
  • Overvoltage protection
  • Low output ripple
  • Active power factor correction
  • IEC EN61000-3-2 compliance
  • Wide Range Adjustable output
  • Remote sense on main output
  • 12 V Aux output
  • Overload protection
  • Power fail and remote inhibit
  • Single wire current sharing
Output(s) Model No Buy Now Evaluation
6 V @ 35 A LPS172 Buy Now Request
6 V @ 35 A LPS172-C Buy Now Request
12 V @ 15 A LPS173 Buy Now Request
12 V @ 15 A LPS173-C Buy Now Request
24 V @ 12 A LPS174 Buy Now Request
24 V @ 12 A LPS174-C Buy Now Request
54 V @ 7.5 A LPS175 Buy Now Request
54 V @ 7.5 A LPS175-C Buy Now Request

Join MyPower

Join MyPower to access Embedded Power's Community Portal where you'll have free access to a wealth of information, tools, videos, ebooks and a whole lot more.

Sign in to MyPower

Don't have an account Register Here

Stay Connected

Sign up to Receive our eNewsletter

Follow us on: