NTS500-M Medical Series WebSheet

• Total Max Power: 500 W
• Total Max Current: 41.7 A
• Input Voltage: 85 V to 264 V
• Output Voltage: 12 V to 48 V
• Outputs: Single
• Size (L x W x H): 7.000" x 4.000" x 1.500"
• Warranty: 2 years
• Operating Temperature: 0 to 50°C

Electrical Specifications

Input

• Efficiency: 85% typical at full load
• EMI filter: Meets FCC Class A conducted CISPR 22 Class A
• Safety ground leakage current: 275 uA @ 50/60 Hz, 264 VAC input
• Inrush current: 50 A max, cold start @ 25°C
• Power factor: 0.99 typical
• Frequency: 47 - 63 Hz
• input range: 85 - 264 VAC, 120 - 300 VDC

Output

• Overvoltage protection: 20% to 35% above nominal output
• Adjustment range: +/-5%
• Maximum power: 200 W convection, 500 W w/ 30 CFM
• Overload protection: Short circuit protection on all outputs.
• Standby output: 5 V @ 1 A regulated ±5%
• Remote inhibit: Requires contact closure to inhibit outputs
• Aux output: 12 V @ 1 A -5 %, +10%
• Hold-up time: 20 ms @ 500 W load at nominal line

• Active power factor correction
• Remote sense
• Power fail and remote inhibit
• Single wire current sharing
• Built-in EMI filter
• Low output ripple
• 5 V standby
• 12 V fan output
• Overvoltage protection
• Overload protection
• Thermal overload protection
• DC power good
• Built in OR-ing diode / FET
• Optional fan cover (-CF suffix)
• Optional end fan cover (-CEF)
• PM Bus compliant
• Digital I2C interface
• IEC EN61000-3-2 compliance
• 2 year warranty

Output(s)	Model No	Buy Now	Evaluation
12 V @ 41.7 A	NTS503-M	Buy Now	Request
12 V @ 41.7 A	NTS503-M-CEF	Buy Now	Request
12 V @ 41.7 A	NTS503-M-CF	Buy Now	Request
24 V @ 20.8 A	NTS505-M	Buy Now	Request
24 V @ 20.8 A	NTS505-M-CEF	Buy Now	Request
24 V @ 20.8 A	NTS505-M-CF	Buy Now	Request
48 V @ 10.4 A	NTS508-M	Buy Now	Request
48 V @ 10.4 A	NTS508-M-CEF	Buy Now	Request
48 V @ 10.4 A	NTS508-M-CF	Buy Now	Request