LPS100-M Series WebSheet
| Print
Product Summary
The LPS100-M AC-DC medical power supplies feature both ITE and non-patient contact and non-patient critical medical safety approvals. The series has a compact open-frame design; measuring just 2 x 4 inches, with a height of only 1.29 inches, and has a typical full load efficiency of 88 percent and a power density in excess of 14 watts per cubic inch. The supply is primarily intended for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
The LPS109-M has POE (Power onver Ethernet) isolation on the main output.
Resources & Downloads
Datasheet
- Total Max Power: 150 W
- Total Max Current: 24 A
- Input Voltage: 90 V to 264 V
- Output Voltage: 5 V to 54 V
- Outputs: Single
- Size (L x W x H): 4.000" x 2.000" x 1.290"
- Warranty: 2 years
- Operating Temperature: -20°C to 70°C
Electrical Specifications
Input
- Frequency: 47 - 63 Hz
- Efficiency: 88% typical at full load
- Fan Output: 12 V @ 1 A isolated, +/-5%
- Safety ground leakage current: 275 uA @ 50/60 Hz, 264 VAC input
- Power factor: 0.99 typical
- Inrush current: 50 A max., cold start @ 25°C
- Input range: 90 - 264 VAC, 120 - 300 VDC
Output
- Power fail: Open collector logic signal
- Adjustment range: ±10% minimum on the main output
- Hold-up time: 10 ms @ 125 W load, 120 VAC input
- Overload protection: Short circuit and case overload protected
- Remote Sense: Compensates for 0.5 V lead drop
- Medical and ITE safeties
- Active power factor correction
- 2 x 4 x 1U form factor
- Isolated 12 V Fan output
- Overload protection
- Built-in Class B EMI filter
- Remote sense
- EN61000-3-2 compliant
- Adjustable main output
- Power fail
- Thermal overload protection
- Overvoltage protection
- POE isolation on main output of the LPS109-M
