LPT100-M Series WebSheet
| Print
Product Summary
The LPT100-M triple output AC-DC power supply series feature both ITE and non-patient contact and non-patient critical medical safety approvals. These power supplies have a compact open-frame design measuring just 2 x 4 inches, with a height of only 1.28 inches, with a typical full load efficiency of 82 percent and a power density in excess of 12 watts per cubic inch. The supply is primarily intended for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and nonpatient critical use in low power medical, dental and laboratory applications.
Resources & Downloads
Datasheet
- Total Max Power: 130 W
- Total Max Current: 18 A
- Input Voltage: 90 V to 264 V
- Output Voltage: -15 V to 24 V
- Outputs: Triple
- Size (L x W x H): 4.000" x 2.000" x 1.280"
- Warranty: 2 years
- Operating Temperature: -20°C to 70°C
Electrical Specifications
Input
- Frequency: 47 - 63 Hz
- Inrush current: 50 A max., cold start @ 25°C
- Efficiency: 82% typical at full load
- Input range: 90 - 264 VAC, 120 - 300 VDC
- Safety ground leakage current: 275 uA @ 50/60 Hz, 264 VAC input
Output
- Power fail: Active low TTL logic signal
- Adjustment range: All outputs -40% to +10% except for 24 V
- Overload protection: Short circuit and case overload protected
- Hold-up time: 10 ms @ 130 W load, 120 VAC input
- Remote Sense: Compensates for 0.5 V lead drop on main output
- Medical and ITE safeties
- Active power factor correction
- 2 x 4 x 1U form factor
- Overload protection
- Built-in Class B EMI filter
- Remote sense
- EN61000-3-2 compliant
- Adjustable outputs
- Power fail
- Thermal overload protection
- Overvoltage protection
