DA16 Series WebSheet
- Total Max Power: 16 W
- Total Max Current: 1.3 A
- Input Voltage: 90 V to 264 V
- Output Voltage: 12 V
- Outputs: Single
- Size (L x W x H): 2.100" x 3.000" x 1.200"
- Warranty: 2 years
- Operating Temperature: 0 to 40C
Download Datasheet
Special features
- Built in EMI filter (CISPR 22 Class B)
-
Thermal protection
-
High efficiency
-
Switching wallmount power supply
-
Universal AC input
-
Blue Angel compliance
-
Overload and short circuit protection
-
Fully regulated output
-
CE Mark EMC & LVD
-
LED power good indicator
-
High MTBF
-
Constant voltage
-
Available in multiple AC plug configurations
Electrical specs
Input
- Inrush current: 40A @ 230 VAC, cold start @ 25C
- EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B
- Input range: 90 - 264 VAC (wide range)
- Efficiency: 75% @ full load typical, @120VAC
- Input current: 0.18A rms @ 120 VAC; 0.36A @ 240VAC
- Frequency: 47 - 63 Hz
- Safety Ground leakage current: 300µA max. @ 50/60 Hz, 230 VAC input
Output
- Output cable/connector: DC cable with 2.5 mm x5.5mm barrel plug
- barrel polarity: DC plug center +v DC plug outer -v
- Overload protected: @ 150% above maximum
- Voltage regulation: ± 2% @ constant voltage mode
- Overtemperature protection: Auto recovery
- Maximum Power: (Po) 16W
- Hold-up time: 20 ms. typical at full load @ 115VAC
- Overload protection: Output short circuit protection auto recover.
- Voltage: (Vo) 12V
- Overvoltage protection: 25% above nominal output maximum. Latching type, recycle AC to reset.
DA16 models