• About us
  • Company profile
  • Quality statement
  • Employment
  • Legal & privacy
  • Terms & conditions
• Press room
  • Press releases
  • Photo library
  • Technical feature articles
  • Media contacts
• Products
  • AC-DC power supplies
    • 10 W - 500 W
      • 10 W - 85 W
      • 86 W - 135 W
      • 136 W - 260 W
      • 261 W - 500 W
      • Cover kit
    • 10 W - 500 W Medical
      • 10 W - 85 W
      • 86 W - 135 W
      • 136 W - 260 W
      • 261 W - 500 W
    • Distributed power front-end
      • 1U
      • 2U
      • 3U
    • DIN rail mount
      • Single phase
      • Three phase
    • External adapter
      • Freestanding
      • Wall mount
    • External adapter medical
    • PFC modules
      • Full brick
      • Three quarter brick
    • Medium to High Power
      • MP series (400 W - 1 kW)
      • iMP Series (750 W - 1.5 kW)
      • VS series (1 kW - 2.5 kW)
      • iVS series (1.5 kW - 4.860 kW)
    • MicroTCA power module
  • DC-DC Converters
    • ATCA bus converters
    • FPGA power solutions
    • High voltage
      • Full brick
      • Half brick
    • Industry standard isolated
      • 1/16 brick
      • 1/8 brick
      • 1/4 brick
      • 1/2 brick
      • Bus converter
      • RF power
    • Low power isolated industrial
      • 1" x 1" (25.4 x 25.4 mm)
      • 1" x 2" (25.4 x 50.8 mm)
      • 1.2" x 0.8" (20.3 x 31.8 mm)
      • 2" x 1.6" (50.8 x 40.6 mm)
      • 2.2" x 2.2" (56 x 56 mm)
      • Others
    • Non-isolated
      • C-Class
      • E-Class
      • F-Class
      • Memory
      • POLA
      • POLA - memory
      • VRM processor
    • PFC
    • Ultra low profile
      • Isolated
      • Non isolated
    • MicroTCA power module
  • Stock check
  • Production status
• Support
  • Product
    • Technical support
    • Inquiry form
    • Return authorization
    • Technical literature
  • Sales locations
• Contact us
• My Power

HPS35 Series WebSheet

Special features

• Hot Plug
• Remote inhibit
• Overcurrent protection (OCP)
• No minimum load
• 5VSB@2A
• DC OK signal and indicator LED
• CISPR22, EN55022 Class-B conducted/radiated EMI
• Active Power Factor Correction
• AC OK signal and indicator LED
• N+1 Redundant
• Remote Sense on main output
• Overtemperature protection (OTP)
• EN61000 immunity standards
• EN61000-3-2 compliant
• Optional I2C board (pending)
• Overvoltage protection (OVP)

Electrical specs

Input

• Input voltage: 90-264 VAC typical
• Inrush current: 40 A peak typical @ 25°C
• Power factor: 0.98 typical @ 115 VAC, full load
• Leakage current standard: <0.5 mA max @ 230 VAC @ 60Hz (per module)
• Holdup time: 20 ms minimum (independent of input VAC)
• Harmonic distortion: Meets EN61000-3-2
• Frequency: 47-440 Hz
• Efficiency: 80% typ @ full load, 230 VAC
• Turn-on time: AC - ON 2 sec.
• EMI filter standard: CISPR 22 EN55022 Level “B"
• Radiated EMI: CISPR 22 EN55022 Level “B"
• AC OK: 5 ms early warning minimum before outputs lose regulation
• Isolation: Meets EN60950

Output

• Adjustability: ±5% of nominal output voltage
• Overall reg: ±2%
• Dynamic response: 4% with 50% load step
• Recovery time: To within 1% in <300 µsec
• Overcurrent protection: 115%-130% of rated output current
• Overvoltage protection: 120 - 140% . AC Reset.
• Thermal protection: Main and Aux disabled when internal temp exceeds safe operating range.
• Single wire parallel: Current share to within 10% of total rated current on main output
• Minimum load: Not required
• Global Inhibit: Logic '0'
• Ripple: 1% of Vout Pk - Pk (20 MHz bandwidth)
• Short circuit protection: Protected for continuous short circuit. Auto recovery.
• Reverse voltage protection: 100% of rated output current
• Remote sense: Up to 0.5 V total drop
• Standby voltage: 5 VDC @2A max. present whenever AC input is applied

HPS35 models