+1 888 412 7832 
Email Us
LPQ250 downloads
LPQ250 datasheet
0.1MB, PDF- Certificates, TRN's
& documents
16 Documents - Get Adobe Reader >
Shortform catalog
A new shortform catalog from Emerson Network Power covers every standard Astec and Artesyn ac-dc power supply and dc-dc converter. The catalog contains 64 information-packed pages and is available in PDF and printed formats.Download shortform catalog
Sales locations
Select your country below to locate your nearest sales representative, distributor or value added reseller.
Ask an expert
Do you have a question about an Emerson Network Power Embedded Power product or service? Do you wish to request a quote or proposal?
LPQ250 Series WebSheet
- Total Max Power: 250 W
- Total Max Current: 6 A
- Input Voltage: 85 V to 264 V
- Output Voltage: -15 V to - 5 V
- Outputs: Quad
- Size (L x W x H): 9.000" x 5.000" x 2.000"
- Warranty: 2 years
- Operating Temperature: 0 to +70 C
- Download Datasheet
Special features
- Active power factor correction
- Adjustable floating 4th output
- Single wire current sharing
- Overload protection
- 2 Supervisory outputs 5 V and 12 V
- IEC EN61000-3-2 compliance
- Remote sense on main output
- Power fail and remote inhibit
- Overvoltage protection
- Built-in EMI filter
- Optional end fan cover -CEF
- Optional with fan cover -CF
- 120 KHz switching frequency
- Cover -C
- DC power good
- Thermal overload protection
Electrical specs
Input
- Inrush current: 20 A max., cold start @ 25°C
- Input range: 85-264 VAC; 120-300 VDC
- Frequency: 47-440 Hz
- Power factor: 0.99 typical
- Safety ground leakage current: <0.5 mA @ 50/60 Hz, 264 VAC input
- Efficiency: 75% typical at full load
- EMI filter: FCC Class B conducted and radiated CISPR 22 Class
Output
- Hold-up time: 16ms @ 250 W load, 115 VAC nominal line
- Overload protection: Short circuit protection on all outputs. Case over
- Supervisory outputs: 5 V @ 100 mA regulated, 12 V @ 500 mA
- Adjustment range: ±5% min. on main: 5-25 V on 4th output
- Maximum power: With cover: 250 W with 30 CFM forced air, (-C) (-C
- Overvoltage protection: 5 V output: 5.7-6.7 VDC.
Logic Control
- Power failure: TTL logic signal goes high 50-150 msec after 5V ou
- Remote on/off: Requires an external contact (N.O or N.C) to inhib
- DC OK: TTL logic goes high 50-150 msec after 5 V output.
- Remote sense: Compensates for 0.5 V lead drop min. Will operate
LPQ250 models
| Output(s) | Model No | Stock Check | Evaluation |
| 5.5 V @ 35 A, 12 V @ 10 A, -12 V @ 6 A | LPQ252-C | Check | Request |
| 5.5 V @ 35 A, 12 V @ 10 A, -12 V @ 6 A | LPQ252-CEF | Check | Request |
| 5.5 V @ 35 A, 12 V @ 10 A, -12 V @ 6 A | LPQ252-CF | Check | Request |
| 5.5 V @ 35 A, 15 V @ 10 A, -15 V @ 6 A | LPQ253-C | Check | Request |
| 5.5 V @ 35 A, 15 V @ 10 A, -15 V @ 6 A | LPQ253-CEF | Check | Request |
| 5.5 V @ 35 A, 15 V @ 10 A, -15 V @ 6 A | LPQ253-CF | Check | Request |