Network Power Divisions:
Live Chat     Call+1 888 412 7832     EmailEmail Us

NTQ160 Series WebSheet

NTQ160
  • Total Max Power: 165 W
  • Total Max Current: 15 A
  • Input Voltage: 85 V to 264 V
  • Output Voltage: -12 V to 12 V
  • Outputs: Quad
  • Size (L x W x H): 4.250" x 8.500" x 1.500"
  • Warranty: 2 years
  • Operating Temperature: 0 to +70 C
  • Download Datasheet

Special features

  • Overload protection
  • Active power factor correction
  • DC Power good
  • Thermal overload protection
  • Outputs 3 & 4 are floating
  • Overvoltage protection
  • Built-in Class B EMI filter
  • Wide range adjustable on outputs 1 & 2
  • Single wire current sharing on outputs one and two
  • 5V Standby output
  • Power fail and remote inhibit
  • Remote sense on outputs one and two
  • EN61000-3-2 compliance

Electrical specs

Input

  • Leakage current: TTL compatible (positive/enable option)
  • Power factor: 0.99 typical
  • EMI filter: FCC Class B conducted and radiated, CISPR 22 Class B conducted and radiated, EN55022 Class B conducted and radiated, VDE 0878 PT3 Class B conducted and radiated.
  • Inrush current: 150mV max deviation at
  • Frequency: 47-63 Hz
  • Input range: 85-264 VAC
  • Efficiency: 65% typical at full load @ 115 VAC input

Output

  • Adjustment range: 1.8V - 3.5V; 3.0V - 5.5V on outputs one and two
  • Standby output: 5V@ 2 A regulated ±5%
  • Overvoltage protection: Tracks outputs 1 & 2: 20% to 35% above output setting
  • Hold-up time: 20 ms @ 165 W load
  • Maximum power: 50 W convection, 165 W with 30 CFM forced air
  • Overload protection: Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating. Latching type recycle AC to reset.

Logic Control

  • Power failure: TTL logic signal goes high 100-500 msec after V1 output; it goes low at least 4 msec before loss of regulation
  • Remote Inhibit: Requires contact closure to inhibit outputs
  • Remote sense: Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protection.
  • DC Ok: TTL logic signal goes high after main output is in regulation. It goes low when there is a loss of regulation.

NTQ160 models

Output(s) Model No Buy Now Evaluation
3.5 V @ 30 A, 5.5 V @ 20 A NTQ162 Buy Now Request
5.5 V @ 30 A, 3.5 V @ 20 A NTQ163 Buy Now Request
5.5 V @ 30 A, 3.5 V @ 20 A NTQ165 Buy Now Request