NTS350 Series WebSheet
- Total Max Power: 350 W
- Total Max Current: 16.6 A
- Input Voltage: 85 V to 264 V
- Output Voltage: 12 V to 54 V
- Outputs: Single
- Size (L x W x H): 4.000" x 7.000" x 1.500"
- Warranty: 2 years
- Operating Temperature: 0 to +70 C
Download Datasheet
Special features
- Low output ripple
-
Built in OR-ing diode / FET
-
Thermal overload protection
-
12 fan output
-
Overvoltage protection
-
Active power factor correction
-
IEC EN6100-3-2 compliance
-
Single wire current sharing
-
DC power good
-
Optional fan cover (-CF suffix)
-
Optional End fan cover (-CEF)
-
Supervisory output 5 V and 12 V
-
Overload protection
-
Remote sense
-
Power fail and remote inhibit
-
Built-in EMI filter
Electrical specs
Input
- leakage current: <0.5 mA @ 50/60 Hz, 264 VAC input
- Inrush current: 38 A max., cold start @ 25°C
- Frequency: 47-440 Hz
- Efficiency: 85% typical at full load
- Power factor Safety ground: 0.99 typical
- EMI filter: FCC Class B conducted and radiated CISPR 22 Class B conducted and radiated EN55022 Class B conducted and radiated VDE 0878 PT3 Class B conducted and radiated.
Output
- Maximum power: With cover: 350 W with 30 CFM forced air
- Hold-up time: 20 ms @ 350 W load, 115 VAC nominal line at factory voltage setting
- Supervisory outputs: 5 V @ 2A regulated, 12 V @ 1A
- Adjustment range: ±5%
- Overload protection: Short circuit protection on all outputs. Case overload protected @ 115-130% above peak rating
- Overvoltage protection: 20% to 35% above nominal output
Logic Control
- DC OK: TTL logic goes high after the output is in regulation. It goes low when there is loss of regulation.
- Power failure: TTL logic signal goes high 100-500 msec after main output. It goes low at least 4 msec before loss of regulation
- Remote sense: Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.
- Remote on/off: Requires an external contact closure to inhibit outputs
NTS350 models