DA12-M Medical Series WebSheet
- Total Max Power: 12 W
- Total Max Current: 2 A
- Input Voltage: 90 V to 264 V
- Output Voltage: 5 V to 12 V
- Outputs: Single
- Size (L x W x H): 2.360" x 1.100" x 2.400"
- Warranty: 2 years
- Operating Temperature: 0 to 40C
Download Datasheet
The new, high density, DA12-M series features both ITE and non-patient contact and non-patient critical medical safety approvals. The DA12-M series has a compact slim width wall mount design producing 10 to 12 watt power and is available in multiple ac plug configurations. Available in 5v and 12 volt outputs.
Special features
- Medical and ITE safeties
-
Built in EMI filter (CISPR 22 Class B)
-
Thermal protection
-
High efficiency
-
Switching wallmount power supply
-
Universal AC input
-
Energy Star 2.0 and CeC approvals
-
Overload and short circuit protection
-
Fully regulated output
-
CE Mark EMC & LVD
-
Constant voltage
-
Available in multiple AC plug configurations
Electrical specs
Input
- Input current: 0.18A rms @ 120 VAC; 0.36A @ 240VAC
- Inrush current: 28A @ 264 VAC, cold start @ 25C
- Input range: 90 - 264 VAC (wide range)
- EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22
- Frequency: 47 - 63 Hz
- Safety Ground leakage current: 100µA max. @ 50/60 Hz, 264 VAC input
- Efficiency: 75% @ full load typical, @120VAC
Output
- Overtemperature protection: Auto recovery
- Maximum Power: (Po) 12W
- Overload protected: @ 150% above maximum rating
- Overvoltage protection: Non Latching type
- Output cable/connector: DC cable with 2.5 mm x5.5mm barrel plug
- Overload protection: Output short circuit protection auto recover.
- Hold-up time: 10 ms. typical at full load @ 230VAC
- Voltage: (Vo) 5v and 12V versions
DA12-M Medical models